What apps would you love to have open-source alternatives for?
It seems like the FOSS community is continuing to grow, and FOSS apps keep getting better (Immich reallh blew my mind recently), which is a big win 😎 but there are still many apps I use that I would kill for an open source alternative. I am curious what you guys think? Are there any apps you'd love alternatives for?
You are viewing a single comment
@Olgratin_Magmatoe
There are currently some changes on the way. They fundamentally solve the Topo-Naming-Problem I propose to try again after the next release.
I don`t know the #Onsel fork. In what way does it differ from #Freecad or Freecad from #realthunder?
@ClearCutCoconut
I'm not super familiar with that problem, as it has been a minute. But I might try to give it another go at some point.
From a user perspective, it has a much more friendly UI in my opinion. When you click on an object, it displays a list of all possible actions you can take with said object. That to me was a huge upgrade over the base FreeCad implementation.
Are they settled on an assembly workbench yet?
@GorGor
I don't know.
@michel @Olgratin_Magmatoe @ClearCutCoconut
1/2
@Olgratin_Magmatoe @ClearCutCoconut I'm very sorry for your bad user experience! What you've described, sounds like some basic user errors which would've been easily solved by sticking to good modeling practices. To be honest, these aren't always easy to follow / learn in the first place. If you're interested, have a look at the wiki: https://wiki.freecad.org/Feature\_editing#Advice\_for\_creating\_stable\_models
#FreeCAD #fc3d
The most egregious issue I had was in trying to loft between two faces, such that the curve between the faces was a 3D one.
In Fusion360, it's pretty damn simple, you click the first face, ctrl+ click the second, then select the loft option. Then it's pretty much done.
In FreeCad/Ondsel, in trying to look up a tutorial to see how such an operation is normally done, the only tutorial that got me remotely close was this one.
https://www.youtube.com/watch?v=fv53D00KdGQ
Following the tutorial would lead to errors, crashes, and even if it had worked, it is such a painful way to do this operation.
So this isn't simply an issue with bad modeling practices. Maybe it's a terrible tutorial and there is better options out there. But the ease in which it is possible to do this task in Fusion360 should be the gold standard.