Buy a USB floppy drive for each one and then create a RAID 0 disk array. It'll be super quick and gloriously noisy.
For anyone not familiar...
That would give you 14.4 MB (1.44 MB formatted x 10) of capacity. The rated speeds for a floppy drive is 1000 kilobits per second. So if you did a Raid-0 (striped), let's just say that gives you 10,000 kilobits per second. We convert transfer speeds to storage speeds (8 bits to 1 byte)... Means 1.25MB/s. So best case, it takes you about 11.5 seconds to do a full transfer of the 14.4MB. it actually be much slower because this is best case scenario.
So you’re saying we just need a few (hundred) dozen more disks and drives? Look out Seagate, you’ve got a zombie competitor coming.
Goodness, the noise
But when that noise is used in the right hands ....
Buy a USB floppy drive for each one and then create a RAID 0 disk array. It'll be super quick and gloriously noisy.
For anyone not familiar... That would give you 14.4 MB (1.44 MB formatted x 10) of capacity. The rated speeds for a floppy drive is 1000 kilobits per second. So if you did a Raid-0 (striped), let's just say that gives you 10,000 kilobits per second. We convert transfer speeds to storage speeds (8 bits to 1 byte)... Means 1.25MB/s. So best case, it takes you about 11.5 seconds to do a full transfer of the 14.4MB. it actually be much slower because this is best case scenario.
So you’re saying we just need a few (hundred) dozen more disks and drives? Look out Seagate, you’ve got a zombie competitor coming.
Goodness, the noise
But when that noise is used in the right hands ....
https://youtu.be/AtRVTYMA87k?si=kC1U5Q_Y3hOeC1t5
Yap, watched all 8 minutes. Flopptron 'tamed a tornato'