A modern standard for indoor lighting receptacles.
It’s silly that we ship a driver and circuit board packed into the lightbulb just to make it compatible with screw bulb receptacles. We should have a new socket that accepts efficient lightbulbs and that can reuse or modularize driver electronics. Instead, the market has gone for full integration at the expense of the consumer.
If you build a new home these days, you get the lightbulb and fixture integrated together. This necessitates replacing the entire assembly when it fails, and when you have to do this eventually you’re going to have mismatched indoor lighting unless you had the foresight to buy extra units.
We need a new lightbulb socket standard, but for modern lighting.
And it must not connect to wifi or the internet.
Having some kind of control signal available over wire would be nice, though. So the only way to dim lights wasn't to turn them on and off again a hundred times a second. That would also enable timers and automatic lights for those who want them. Without clouds.
Local ZigBee is fine, like all the 12v IKEA lighting.
I love telling my phone to turn off my lights in bed, or changing the color of my lights with a simple command. It’s super handy and I’m never going back.
I agree that that is nice. However, in my opinion, it is not functionality that should be facilitated by a lighting receptacle standard.
Hue or whatever brand you like, can build that functionality on top of an independent standard.
That way, you can use it if you want, but the standard doesn't force you to. Similarly to the current situation but with a more sensible standard for low power applications such as LED lighting
Ahhh. I see. Yea, just make all the receptacles the same! Hue is nice in that the bridge doesn’t need to connect to the internet to communicate with the devices, and the lights only go through the same bridge.
Have you not heard of Home Assistant?
Those electronics are frequently for converting AC to DC and/or regulating the LEDs off current, or for built-in features like zwave, color changing, etc.
Assuming you are mostly interested in getting rid of the AC conversion stuffz are you suggesting adding DC light outlets in each room? Where would you cconvert from mains?
Personally, I'd like to convert pretty much all of my lighting to 12v or 24v DC, but want to make sure I understand what you had in mind.
A modern standard for indoor lighting receptacles.
It’s silly that we ship a driver and circuit board packed into the lightbulb just to make it compatible with screw bulb receptacles. We should have a new socket that accepts efficient lightbulbs and that can reuse or modularize driver electronics. Instead, the market has gone for full integration at the expense of the consumer.
If you build a new home these days, you get the lightbulb and fixture integrated together. This necessitates replacing the entire assembly when it fails, and when you have to do this eventually you’re going to have mismatched indoor lighting unless you had the foresight to buy extra units.
We need a new lightbulb socket standard, but for modern lighting.
And it must not connect to wifi or the internet.
Having some kind of control signal available over wire would be nice, though. So the only way to dim lights wasn't to turn them on and off again a hundred times a second. That would also enable timers and automatic lights for those who want them. Without clouds.
Local ZigBee is fine, like all the 12v IKEA lighting.
I love telling my phone to turn off my lights in bed, or changing the color of my lights with a simple command. It’s super handy and I’m never going back.
I agree that that is nice. However, in my opinion, it is not functionality that should be facilitated by a lighting receptacle standard.
Hue or whatever brand you like, can build that functionality on top of an independent standard.
That way, you can use it if you want, but the standard doesn't force you to. Similarly to the current situation but with a more sensible standard for low power applications such as LED lighting
Ahhh. I see. Yea, just make all the receptacles the same! Hue is nice in that the bridge doesn’t need to connect to the internet to communicate with the devices, and the lights only go through the same bridge.
Have you not heard of Home Assistant?
Those electronics are frequently for converting AC to DC and/or regulating the LEDs off current, or for built-in features like zwave, color changing, etc.
Assuming you are mostly interested in getting rid of the AC conversion stuffz are you suggesting adding DC light outlets in each room? Where would you cconvert from mains?
Personally, I'd like to convert pretty much all of my lighting to 12v or 24v DC, but want to make sure I understand what you had in mind.