Prosecutors say Alec Baldwin was ‘engaged in horseplay’ with gun before fatal shooting

girlfreddy@lemmy.ca to News@lemmy.world – 284 points –
Prosecutors say Alec Baldwin was ‘engaged in horseplay’ with gun before fatal shooting
theguardian.com

Fewer than three weeks before actor Alec Baldwin is due to go on trial in Santa Fe, New Mexico, prosecutors have said that he “engaged in horseplay with the revolver”, including firing a blank round at a crew member on the set of Rust before the tragic accident occurred.

Baldwin is facing involuntary manslaughter charges in the 2021 shooting death of cinematographer Halyna Hutchins.

In new court documents, prosecutors said they plan to bring new evidence to support their case that the 66-year-old actor and producer was reckless with firearms while filming on the set and displayed “erratic and aggressive behavior during the filming” that created potential safety concerns.

Prosecutors in the case, which is due to go to trial on 10 July, have previously alleged that to watch Baldwin’s conduct on the set of Rust “is to witness a man who has absolutely no control of his own emotions and absolutely no concern for how his conduct affects those around him”.

In the latest filing, special prosecutors Kari Morrissey and Erlinda Johnson allege that Baldwin pointed his gun and fired “a blank round at a crew member while using that crew member as a line of site as his perceived target”.

155

You are viewing a single comment

Actors miming shooting looks ridiculous. Like laser tag guns. Actual recoil looks much more realistic.

❌When the recoil looks fake

✔️Action hero only ever gets shot in shoulder despite thousands of rounds shot at them, bullets used by bad guys never hollow point

It’s like a bad accent.

Some people won’t notice, but for those who can see/hear the difference it takes the suspension of disbelief away immediately

The must be a way to create "false" gun in the sense that they only takes blanks and have nonfunctional barrels. Or I'm I too optimistic?

Unfortunately, guns are deceptively simple. Just about anything that can detonate a realistic looking blank is capable of firing an actual bullet. And even if it's just a blank, any obstruction in the barrel can end up becoming an ad-hoc projectile by the force. Every once in a while, you have that happen in Civil War re-enactments.

Thats also how Brandon Lee died. Iirc there was a squib malfunction that they didn't notice so when they shot a blank, the round was pushed out and killed him.

We could get around this by having specific calibers that only come in blanks.

Not really though because still, if anything is in the barrel, it becomes a projectile.

Ok but that's a separate issue and something that can happen with a regular gun loaded with a regular caliber blank, what they're saying is fake guns for movies should use a caliber for which no bullets exist, solving the main part of the issue, i.e. the fact that someone can load a normal bullet in a gun that is to be used as a prop.

This would help avoid this specific death, but not most others where the projectile wasn't an actual bullet from a live round, but something stuck in the barrel, like the other person says.

This situation was unusual in the sense that an incompetent armorer had live rounds on set, and the gun was loaded with one.

What I mean is that the main part of the issue is exactly not this.

Did anybody ask about most others, or were we having a highly specific conversation about a very real and somewhat recent event?

First,

Did anybody ask about most others,

... doesn't seem relevant, since saying something doesn't require you personally asking about it at all, second,

what they’re saying is fake guns for movies should use a caliber for which no bullets exist, solving the main part of the issue, i.e. the fact that someone can load a normal bullet in a gun that is to be used as a prop.

... answers your question, and that quote is most of the original comment, I could even have quoted the whole of it.

Pot Calls the Kettle irrelevant.

You've failed to read all of the comment I was answering to, which is not yours so it's not clear what are you doing in this thread at all.

Calling you out on whataboutism and watching you get really defensive for some reason. WBU?

"most others"

Maybe I'm not paying enough attention to that, but is it really something that happens that often on movie sets where it's something stuck in the barrel?

Most other cases where people were shot on set

You'll have to help me because I can't find any of those "most other cases"... I haven't looked before the 90s though

https://en.m.wikipedia.org/wiki/List_of_film_and_television_accidents

Brandon Lee? And someone else whom I can't remember

accidentally shot and killed in North Carolina with a .44 magnum gun that was intended to fire blanks but contained a bullet left behind after a dummy round had been inserted and removed.

I don't know why you would be opposed to taking measures to prevent one way these accidents can happen just because they can happen another way... 100% or nothing is a pretty stupid way to deal with issues.

The explosive effect of the muzzle blast caused enough blunt force trauma to fracture a quarter-sized piece of his skull and propel this into his brain, causing massive hemorrhaging.

Pressure from the explosion of the blank coming out the nozzle, so no debris involved either.

3 more...
3 more...
3 more...
3 more...

If the armorer wasn't willfully negligent it wouldn't be a problem. Not a problem for the vast majority of film sets. Just pure lack of professionalism from the armorer whose sole core responsibility is to ensure safety.

if Baldwin wasn't waiving a gun around like a moron, a negligent armorer wouldn't have been a problem, either.

the armorer being negligent (and she was), doesn't mean that Baldwin wasn't also being negligent. and lets be perfectly clear: the reason Gutierrez-Reed was hired over other more professional armorers is precisely because she was "less professional"- or more bluntly, because she was willing to not insist on proper safety protocols that caused delays in shooting.

Woah woah woah. Baldwin should be allowed to do whatever the fuck he wants with a prop gun. If an armorer gives him a gun on a set, why would he reasonably believe it was able to hurt or kill someone?

If an actor is given a prop pipe bomb, and he throws it at a cast member in jest and it explodes...because the explosive expert gave him a live explosive why the fuck is that the actors fault?

Why is is Alec's fault he was horsing around with what effectively should have been a toy. It should have been a fancy cap gun at worst.

Woah woah woah. Baldwin should be allowed to do whatever the fuck he wants with a prop gun. If an armorer gives him a gun on a set, why would he reasonably believe it was able to hurt or kill someone?

because it's a fucking weapon. he knew it was a weapon.

secondly, it was Hall (another producer) that gave him the weapon, not HGR.

thirdly, you don't fuck around with even the non-firing propguns precisely because of how easy it is to mistake them. He fucked around, and Alyna Hutchins found out. Ergo, it's negligent homicide

Hate to say it, but I agree here.

This is the price paid for not treating real guns with respect. Prop bullets or otherwise.

Wouldn't the live round have shot someone no matter what? The point of a blank round is so you can aim a gun at someone and not kill them.

Uhm.

That’s not how Blanks work

And even if there is some how no wadding They can still be lethal

You cannot render a functional weapon (blank firing or “real” or whatever you want to call it,) totally safe.

Which is why you should always treat them as something that will kill you given half the chance. (It was literally made to do just that.)

And you should always treat look alikes as if they were real because a) they’re easy to mistake for real ones and vice versa and b) the other people may not realize it’s a prop. (On a movie set, unlikely, but you never know who’s around and how they will respond. Or where an active shooter is going to appear.)

As for the cartridges, usually there’s tell tales of one sort or another. For dummy rounds it’s common to press the otherwise empty cartridge with a ball bearing or two so they rattle when shaken. Sometimes they also have a small hole on the wall of the casing

Blanks are, by their nature, lacking the bullet and the top is simply crimped to hold the wadding.

All it would have taken was a proper inspection to verify that it was unloaded/loaded with dummy rounds. Or, alternatively, Baldwin not pointing it at people.

Which leads me to the final thing you should always do: check the damn weapon. Don’t trust armorers. They’re people, too. They make mistakes, they fuck up.

Can I ask what the point of this screed was? I'm aware blanks are dangerous. That's irrelevant. There was a real bullet in the chamber. At some point, even if it was a blank, it would have been pointed at someone and the trigger pulled.

The point appears to be "check the damn weapon", which of course you could have said without 'educating' me, and wouldn't have been undercut with going on endlessly about wadding.

That point is a terrible one because the armourer is the expert, and is the one who should be signing the gun off as safe every time it is opened, not an actor who neither is required to have qualifications nor skills in clearing a gun as safe. If an actor interferes with the weapon, the armourer has to check it again.

It’s stupidly easy to check a firearm. You don’t have to be an expert to do it. For most fire arms it takes 5-10 seconds.

A large part of the “experts” job is to know what is and is not safe protocol, and to enforce it. Part of that includes teaching everyone who’s handling a weapon how to…. Handle a weapon safely.

no question, the armorer fucked up. She’s human. Humans make mistakes. Which is why you check the damn weapon, too. An expert doesn’t mean they don’t make mistakes. An expert means they’ve made enough they should know better. (Or have learned from an older expert.)

Frist off, it is also the actors' job to ensure the gun is safe. He should have been there when the gun was checked and verified it for himself especially when he purposely hired a fuck around and find out armourer.

Secondly, how were they supposed to know your level of knowledge about firearms and ammunition? With them explaining stuff in a simple and quick manner, we are all now operating on the same level of basic knowledge about this, so there should not be any miscommunications going on.

HGR definitely didn't do right here but a lot more went wrong. This was a perfect storm of negligence. Multiple people could have taken minor stands to have prevented this tragic tale. So many people spoke out and zero action was taken to address their concerns.

A layered safety approach is a great idea. But it only works when at least one person in a position to do so does what's right.

Multiple people could have taken minor stands to have prevented this tragic tale

Hutchins took one of those stands filing a union complaint about the safety violations, how tinfoily you wanna get?

Wasn't Baldwin at some level responsible for the armorer though too? Was he the producer or something?

He was a producer but that's a meaningless title handed out to anyone who will front a little money or indeed sometimes just give some advice.

In Blade Runner 2049, Weta Workshop had their laser pistols set up with a solenoid that moved back and forth with a trigger pull. Adam Savage looked at them in a Tested video. I don't know if it's cost prohibitive, but it sure seemed like the right way to do it.

However, you don't get smoke with that. You can definitely rig something up as they did it with a knock off nerf blaster in the 80's or even a cap gun, but at some point I assume the level of complexity makes modifying a real gun cheaper.

You could weld shut the barrel of a gun, which is what a lot of them do, but it seems like it's a cost cutting measure when they used real guns that would retain their value. Alec (as a producer) used a cheap setup with a cheap armorer that didn't know what they were doing. It's both of their faults.

Man, I am a cinema buff and I just really don't think I care if the smoke is there at all, much less just right. Obviously botched attempts at realism are another matter entirely but this just seems like an area ripe for creativity and artistic reinterpretation.

Point is, we cede ground to the theater of the mind all the time, I don't know why realistic gunfire can't be treated similarly, and I think the lack of verisimilitude itself could be approached many different ways and that's even kind of exciting.

Smoke is easy to add in post. Muzzle flash is a little bit harder but also of course very possible.

Having seen Furiosa last night and finding out that they actually digitally manipulated the two actress' faces playing her so that one aged into the other... there's nothing not possible for CG at this point.

A blank killed Brandon Lee while filming The Crow.

Although I don't know the details admittedly.

It was a blank that was fired, but there was a bullet lodged in the barrel from a previous firing they had done using improperly handled prop rounds.

The force from the blank ejected the round into him. :(

The "prop" rounds shouldn't have had real primers, either.

I know some pistols have a co2 blow back system that you can install on your gun so you can practice drawing and dry firing without fear of damaging the gun or hurting people. The only one I know of is for glocks but I'm sure a company could make them for more models.

At that point one should should buy the gas blowback replica that the manufacturer licensed for airsoft. It'll have identical wright and balance, the trigger can usually be tuned to match, and it'll dry fire with about half recoil. It'll plink on target at 40' once the hop-up is calibrated. Should be a modest $150-250 for common Glock, Sig, etc.

That is also a good option that they should be using instead of using real guns.

Some guns are modified in that way for movies. They are still potentially dangerous. Blanks can harm someone close enough or accidentally propel something lodged in the barrel.

Yeah, you would think you could just change the chambers and bullets so only a certain standard of blanks would fit in it, although I guess those guns would become more expensive than the real mass produced ones.

Either way, this is all the result of Baldwin as executive producer cheaping out on every aspect of this shoot, causing this to happen.

If you shot a blank in a gun with a plugged barrel the gun would explode. A blank is just a round minus the projectile, it has just as much "push" from the powder as a real round does.

Brandon Lee died because of this exact scenario ... so you're incorrect.

Brandon Lee died because in a previous scene they used bullets without a casing so the revolver wouldnt look empty facing the camera. One of them got stuck in the barrel, and in the next scene where they were using blanks it was propelled out and struck him. A blank with a bullet in front of it is essntially just a live round with extra steps. Idk what you think I'm incorrect about. That doesn't mean filling in the barrel would be safer, it wouldn't, the gun would explode. The energy released by igniting gunpowder has to go somewhere.

I know there at least used to be gas powered airsoft guns that had minor 'recoil.' I don't know if there's anything particular about them that makes them bad for filming, maybe just the lack of real force on the shooters wrist/shoulder.

Yeah the recoil is much weaker on those and there's no muzzle flash, and certain cinematic shots just can't be done with them like they could with an actual gun.

3 more...

There are airsoft GBB (gas blow back) guns that can replicate recoil from my short online research

What recoil? They are shooting blanks. There is no mass leaving the gun. If you want to cycle the gun on trigger pull in a realistic yet safe way, compressed CO2 can be used. Some movie guns are even electrically/magnetically actuated.

I mean 5-10 grams of vaporized gunpowder leaves the barrel at fairly high speed. It's not a lead round but it's not nothing. Also the spent brass being ejected is not easy to CGI convincingly.

Good points. The gun would have to cycle with CO2 or magnets and feed from a magazine empty casings so that the ejector continues to do its job.

Yet so many movies just add the sound of casings hitting the ground so I wonder if the hassle is worth it except for some specific shots. I enjoy the realism but I'd rather people not put their lives needlessly at risk.

You do know how physics works, right? There is an explosion in the chamber that moves the slide/bolt backward to rack another round of course there will be recoil. Have you ever fired a black powder gun with no bullet in it? There is still a recoil.

And an ejection of hot gas from the muzzle. That has mass.

I've fired a lot of blanks in my life. The recoil is nowhere near a live round.

But there is still more than enough for a movie.

Then a compressed air system will work too.

I agree. Anything that can be done to make it safer while also being a practical effect that looks good should be done. I get that as an actor, they sometimes want to feel the weight of a gun to get into the role, but safety should always be the number 1 priority.

They put a choke on a barrel so automatics can work.

So do people getting shot in movies, but nobody seems to mind.

You can only get that with real rounds though. Blanks are not causing that recoil effect.

Downvoted but correct.

Here's the first link I've found explaining the concept of recoil, and the section relating to blanks and the fact that since bullet weight is a major factor blanks have virtually no recoil conveniently uses movies to illustrate that point.

We gotta sometimes kill a bunch of people on set, because americans need their religion represented correctly

I'm more than willing to sacrifice some moviepeople if it means we get more realistic action scenes

5 more...