What is your "inexpensive" hobby that turned out to be expensive/ you gradually invested lots of money into?

plactagonic@sopuli.xyz to Asklemmy@lemmy.ml – 705 points –

Edit: so it turns out that every hobby can be expensive if you do it long enough.

Also I love how you talk about your hobby as some addicts.

809

Electronics / microcontrollers.

Took just a few months to go from, "I can make a wifi connected weather station for like $20 in components!?" to "oscilloscopes cost how much?"

I'm really happy I don't have enough space for that stuff. Otherwise I would be poor. It's hard enough to keep myself from buying another old computer.

1 more...

I would love to read about this $20 weather station! Do you maybe have a link?

Mine is pretty basic but is built on the shoulders of giants. Also that $20 was from pre-pandemic / pre-chip shortage prices. Iā€™m guessing itā€™s more like $35 now, or maybe high $20s from ali express.

I use Home Assistant for home automation. It has a now official addon called ESPHome for easily configuring esp devices and adding them to Home Assistant.

I bought some cheap dev boards off amazon and thankfully they worked
    an esp8266 microcontroller with IC2 headers and a microusb port already onboard
    a bmp280 that measures temp, humidity, and barometric pressure
    a lux sensor with a plastic dome over the top
I soldered them together on a prototyping board

All the components were supported by esphome, so I just needed to write the device config and then flash the devboard via esphome (in a web browser) over the built in usb.

I 3d printed a housing for it, but you can also buy boxes. It needs airflow but also needs to stay dry. You can use a spray sealant to help avoid corrosion from ambient humidity. I skipped that step because I want to see how quickly it becomes problematicā€¦ and I should probably check on that.

1 more...
2 more...
23 more...

Self-hosting apps / homelab

Getting used enterprise gear is not prohibitively expensive, but the electric bills balloon very quickly.

I currently bought an old desktop from a friend that I use as my Homeserver.

  • I bought 3 HDDs for storage
  • I rent a VPS
  • I rented Proton to host mail for my domain, but switched to netcup groupware because that sucked.
  • Some domains
  • Electricity

Wow I thought it was way more.

One time costs: ~500ā‚¬ Monthly costs: ~15ā‚¬ Plus electricity, but I have solar. I assume it's about 150ā‚¬/year

But I'm a cheap selfhosted, but eventually, I will have a huge ass Enterprise Level Rack in my basement.

3 more...

I ran a "midrange" Sun at home for about ten years. The electric bill was painful, but I never had to turn on the heat in the winter.

2 more...

I'm glad I quickly stopped "homelab" after my old laptop that I used as a server in a cupboard died. Switched to a rented root server for all my selfhosting needs since.

7 more...

Knitting. Super cheap to start, you can pick up a set of needles and some acrylic yarn for under $20. But when you start getting into nice yarns and bigger pieces, you are spending hundreds of dollars on yarn alone for a blanket or a sweater. And you want nice needles in all sizes as well as all types (double pointed, regular and circular)ā€¦ more hundreds of dollars.

Moral of the story is if a friend knits you something with nice yarn, please appreciate it. Lots of effort and thought went into it.

Knitting is expensive for me because I love to start projects but I'm not great at finishing them. Good quality yarn really isn't cheap.

Weaving in the ends is the devil. I hate finishing, but I really enjoy starting šŸ˜­

I really, really love knitting. I'm not good, and I have a hard time finishing projects (tragic case of batterscain. I jump from thing to thing.), but the actual knitting itself? OMG, I love having something to do with my hands, and that something actual makes a real, tangible thing? Somehow magically out of a ball of string? Whatā€½ It's lovely.

It's insane, though, how people who don't knit/crochet will just treat a knitted or crocheted item like it's a cheap Walmart graphic tee. They do not respect the work put into it.

Yeah. I knitted gorgeous socks and scarves in hand-dyed merino for some good friends. Come Christmas they obviously thought, oh MrsDoyle likes knitting, let's get her something knitting related! A selection of the cheapest, nastiest acrylic in hideous colours and some needles. Oooooh. Thank you so much.

4 more...
5 more...

Just started crocheting, and I'm just holding myself back from buying all the yarn, it's gonna get bad

Whatever you do, donā€™t go looking for yarn on Etsy. Fuck, Iā€™ve said too much.

1 more...
2 more...

Oh yes. Yes. I went to the Edinburgh Yarn Festival a few years back. I live nearby, but met people there who'd come from all over - Europe, Japan, the US. All three days sold out. The yarns were so beautiful! And oh so expensive. But you were there in person, fan-girling with you favourite dyers and pattern designers! Spend spend spend. The nearest cash machine ran dry. Such an expensive hobby. But I can't stop.

8 more...

Coffee.

I blame James Hoffman entirely.

Within a year I went from:

Drinking instant coffee at home, but really enjoying "proper coffee"

To

Buying a cafetiere (~Ā£15) + preground coffee

To

Buying a Nespresso (~Ā£60 on offer) + pods

To

Buying a budget espresso machine (~Ā£120) + preground coffee

To

Wasting my money on a cheap manual coffee grinder (~Ā£50) + beans

To

Immediately replacing it with an entry level Sage grinder (~Ā£170)

To

Buying an entry Level "proper" espresso machine (~Ā£700)

It took me a good 2-3 weeks of practicing and dialling in before pulling a good shot of coffee that I'd actually want to drink, but by that point it was also about learning a new skill, learning how different aspects of the process affect the end result and learning how to make all sorts of different espresso-based drinks.

My girlfriend thought I was nuts at first, but a year or so later even she agrees it was worth the investment. I still for the life of me can't get the hang of latte art though.

The problem is now though that I'm a waaaay more critical of coffee from coffee shops, because I spent a long time making bad coffee whilst learning!

Espresso is the line I won't let myself cross (and I don't have the counter space lol), but the $350 for the Kinu M47 was hard to swallow.

Plus side, it's also a great espresso grinder if I do ever eventually head down that road.

2 more...

Similar but different : tea! You go from cheap bagged tea to going down the rabbit hole of loose leaf variations, temp control kettles, brewing vessels and brewing styles.

6 more...

Don't forget to get that pretty Fellow Stag just because it is pretty and no other reason whatsoever

2 more...
29 more...

Mechanical keyboards. The next one is my endgame, I swear. Just one more groupbuy for those keycaps. It never truly ends.

That'll only happen if you build your own boards and stuff. Not like me! I just got a simple Moonlander with some custom keycaps, dampeners, and red switches rather than my initial brown. After that, I realised that the Kinesis Advantage 360 is the way to go, so I'm fully settled now, not like everyone else ............ right?

1 more...

And then it turns out some horrendously ugly piece of plastic (like the Kinesis Advantage 360) is better for actually using.

10 more...

Growing cannabis (legal here in Canada)

ā€¦anyone can grow weed. Growing GOOD weed is an art.

I unintentionally grow weed because I made some tincture for grandma.

Now it just grows on my garden and I can't get rid of it.

One of it's many nicknames is ditchweed for a reason. It's a weed like any other. The US spends millions per year burning it out of ditches on the side of the road all around the country.

Iā€™d be happy to burn it for them!

A little bit at a time!

We call it "The Granny choice" variety.

And trust me it is horrible, for tinctures it is great, but for anything else not.

In Germany we will be allowed to grow some for private use come next year. I have no idea what to get yet, but I will just plant it in a planter in the garden and hope that it works I guess :D

9 more...
12 more...

Running.

Was supposed to be the cheapest way to get exercise. You can do it right from your front door, no gym subscriptions, no specialized equipment (some people will tell you you don't even need shoes), and it's far and away the best time-value exercise I've ever found. You can get away with like 20 minutes 3-4 times a week and be doing great.

Well, turns out I love running and I love distance running so I'm now putting up enough miles to need new shoes 2-3 times a year, a nice Garmin smart watch and heart rate monitor to track my progress, sign-ups for several long-distance races each year, shorts, socks, you get the picture.

Could I do it cheaper? Yeah. But at the end of the day it's a hobby and I like it

You realize it's an addiction when you intend to do 5k. Realize after that Strava didn't work properly on your watch and then you end up doing a second 5k because the first 5k didn't count.

Finish marathon

Legs on fire

Garmin says you only ran 25.6 miles

Have to run another half mile at race pace (so you don't ruin your stats) to make sure you get credit for a marathon

1 more...
1 more...

I was running for a couple of years , and my knee started to give me problems.

I went to an orthopedic Dr, and his advice was to take up swimming and if I wanted to keep running that I should hold on to his business card because someone needed to pay for his kids' college.

I stopped running soon after and avoided surgery for a decade, but it still caught up with me. Knees are definitely cheap with for-profit healthcare.

1 more...

I felt the same way about running until I started getting into triathlons. Watch out for that trap; races are at least $200 each, and road bikes ainā€™t cheap!

2 more...
9 more...

This is not the first post where I feel it but I love it so much that we have a lot of people on Lemmy that can talk about things not related to computers!

Except the selfhost crowd here.

Lol that was going to be mine... from using an old laptop as an xbmc->Plex server to running a thread ripper UnRaid server with 48TB and 2TB cache

1 more...
2 more...
2 more...

For me it is maybe camping.

I just tested my new sleeping bag - under 0.5kg rated to -5Ā°C. And realised that I bought/ replaced lots of gear to higher quality gear over few years.

Camp stoves and fuel! I can buy a lot of bic lighters and cheap metal camping mugs for the cost of a dang Jetboil stove and fuel.

I love my pocket rocket, nothing like getting up early in the morning and boiling some water super quick for some coffee, then heat some more water for some quick oatmeal and sit in my chair and just decompress

1 more...
5 more...

Board games. Things get expensive once you start collecting

But you don't understand, I totally need that 30$ Oceania expansion for my Wingspan that I will play maybe twice a year

Oooh right - I totally forgot about that expansion! I should finally unbox it and prepare it to be played just in case....

My board game group usually buys games more often than we have time to meet and play, so it just comes with this hobby I guess. A friend told me all the time about the stack of three games he had bought and never played and that we still need to play them and then informed me today, that he has just bought Council of Shadows...

1 more...
3 more...

Here are some pubs where you can borrow games and play them there.

But it is usually tradeoff - good game selection and bad beer, or bad games and great beer.

5 more...

Coffee. I'm in a coffee producing country. It could be as cheap as grabbing a bag from the coffee institute (really good and cheap), a cloth filter and call it a day. Instead, I'm on my second espresso machine, fourth grinder, second portafilter set, and have all the doodads to make it just how I like it.

I am starting to become more interested in coffee, but even so I don't think I want to put this much effort into my coffee. Coffee gives me energy, so it can't be too difficult.

1 more...

Same with tea...Once you get to loose tea , the step to importing tea is not very far.
Oh the import tax and shipping :(

5 more...

So the other day my brother came visiting and brought with him a new portafilter for my run of the mill espresso machine. We messed around with setting the grinder, measuring the exact amount of coffee, and so on and we did get a decent cup of coffee. Thing is, I can live with my old bad coffee, my peasant taste buds don't really tell the difference, so I'd rather spend my dough on the other 99 things that deplete the bank account. But to you, who make a passion out of brewing coffee, more power to you!

1 more...

Don't listen to the others. What you are doing is good. I, too, am obsessed with a decent cup.

Just yesterday, I was out with my wife and we went to a coffee shop. I got a superlative cappuccino and picked up a pretty expensive bag of beans meant for espresso. So good.

When I was younger, I could never afford this sort of thing, but as I get older I can't really enjoy a lot of other things and don't need to spend much to live other than basic expenses. :)

2 more...
9 more...

I needed a new saucepan.

I've now replaced half my kitchen.

If you ever go to India, take an extra suitcase that you can fill up with Stainless Steel cookware. The price is amazing, and the quality is so much better than what's available in America. We spent about $85 on what I estimate would have cost $400-$500 in America.

1 more...
6 more...

Fountain pens - I started with a 30 euro Parker but it seems like just one is never enough.

Truth. I started with some disposable Pilot Varsity fountain pens because someone I worked with was forging my signature on paperwork. I haven't worked there for 12 years, and now I have a collection of different fountain pens and ink.

Started with a $50 aluminum Lamy, now I have a brass Kaweco that was about $220. I have a shelf full of inks now.

Help meā€¦.

4 more...

Reading. Bear with meā€¦you start by getting a cheap physical or digital copy of the book. Then you fall in love with the book/author. Then you have to buy all the books by that authorā€¦but not the cheap editionsā€¦the fancy editions! You need to display these babies! And oh! They sell cool collectors items that would be perfect for the book shelf! Rinse and repeat for soā€¦so many books. Sigh.

Only half of that is actually about reading. The rest is just showing off.

You leave my Way of Kings leatherbound and Year of Sanderson boxes alone!

3 more...

3d printing. I started out with a cheapish Chinese model, got annoyed by the lack of accuracy and bought a Prusa.
Then thereā€™s the filaments, accessories, post processing stuff... I own a Dremel now for some reason!
And Iā€™m constantly eyeing those resin 3d printers, telling myself the higher resolution is totally worth itā€¦
The only thing saving my bank account is my low attention span and dozens of other interests :)

I feel you, started with a cheap 200$ ender 3ā€¦. I now have two ender 3ā€™s, an ideaformer belt printer, a bambu p1s, and. Tronxy 400 Iā€™m converting into a Frankenstein printer. Oh and an anycubic mono x resin printer and a laser cutter.

Yea, 6 printers and a freaking laser cutter/engraver. All because I thought it would be fun to tinker with 3D printing

2 more...
10 more...

Gardening.

Containers are surprisingly expensive. And you need a lot of soil to fill them, which gets expensive too. Then it's impossible to only buy the seeds you need, when there are so many cool varieties...

It's all about learning to mcguiver shit. If you have some land/trees keep all the leaves, branches and yard debris, + some cardboard boxes. I fill like a foot or two of every big bed or container that way before I use soil. Cheap material for containers like using big plaster 55g drums cut in half or the top cut off can be found easily. I like to use galvanized roofing sheets with some framing for large beds.

Gardening is a great way to save money from sitting on your bank account.

The raised beds were only $200 for the wood.

I blended compost with my sandy native dirt for only another $200.

The cute fence around it was another $200 plus... Plus $100 for the new tablesaw blade because I needed it to make it.

The additional irrigation setup was only $80.

I get the fertilizer with my employee discount, only around $100 per year.

The front flower bed was only $400 to make it tiered with retaining blocks.

Then there the $300 per year for flowers etc that I just have to have.

Then there is my vegetable seed bill. That's relatively cheap, only around $200 per year.

Since I start my plants I from seeds i need a starting setup. That's $200 for the lights plus another $100 for the heater.

Potting soil and trays are another $75 per year.

Then there's the steady stream of tools etc that I break or wear out and need to be replaced. Another $200-400 per year.

And then there's the koi pond...

The rabbit hole opened for me too.
Even started with growing cacti with seeds I foraged from opuntia figs in Italy

3 more...

I have autism and ADHD, so all of them:

  • Cycling

  • Bicycle touring

  • Skateboarding

  • Vert Skateboarding

  • Freestyle Skateboarding

  • Retro Video Gaming

  • Drawing

  • Reading

  • Programming and Raspberry Pi's

That's only my 30's which is the last 4 years. Hobbies for me are normally short and fierce obsessions when I start, they eventually slow down into a more 'normal' pasttime that I do sometimes to past the time.

4 more...

Bicycling for me. Started off with a cheap old bike that I tried keeping in as goid condition as possible without spending too much on it. Problem with old bikes is wear and tear so things break and new old parts are hard to cheaply. So it became a hackjob. Then got me a new one and realised riding on roads only got boring so I started experimenting with gravel and singletrack.

Guess what? Time for a new bike. And a more expensive one. Carbon. And to maintain it I needed more tools. Also new tubes as the spare ones I had didn't fit that big of tyres. Also moved to a new place and now I got a MTB arena within a few km from home. So of course I had to get me one of those. And to maintain the suspension I needed new stuff, oils and tools.

Clothing. Bags. Events. It becomes a lot after a while.

Also planning for bike nr4, a steel fatbike. Promised myself not to buy anything this year, but the year is soon over...

Did I mention bikepacking? Yeah that is another big black hole of expenses. But a fair bit of overlap with backpacking so costs are split.

7 more...

Motorcycle riding, done the right way.

Bought a decent street bike to start on, learn the ropes for several years, had the occasional mishhap or two which I fixed by myself. Still, cost money to fix things right?

Upgraded to a proper sport bike and realized how much fun it is, also with a new level of danger involved. Still, I wasn't an idiot into things right. Bought 100% proper gear, including a track suit, good helmet, gloves, etc. as any motorcyclist knows, you'll eventually drop your bike, which I did. Again, fixing it yourself is certainly an option, but also again, it cost money.

Then, I made the mistake of going to my first track day. They will allow you to use your own motorcycle as long as you prep it correctly and have decent tires and safety gear. This was an absolute game changer, and I was hooked harder than a heroin addict with an unlimited bank account. Unfortunately, I am neither of those two categories, and track days only get more expensive the deeper you get into them. First of all, they are not cheap to begin with. A decent track day will set you back 300 to $500 just to get on the track. Then, to really get the most out of it, you should have true racing tires with tire warmers. Then there's the matter of getting your bike to the track, race fuel, a place to hang out, etc etc etc. The list goes on and on.

5 more...

Photography.

I started to really get into it back in 2015 with a Sony A6000 and a kit lens. Then you buy more, higher quality lenses. Then you buy better camera bodies with full frame sensor, then lenses that are full frame compatible. Then the various odds and end accessories. Then trips around the world to take pictures of things.

I have taken a break from photography recently, on account that having a kid doesn't allow me a lot of opportunity to edit my photos anymore. They say the best camera you have is the one that is on you. That has proven to be true while I try to be as present as possible around my daughter. I can quickly take out my phone, capture the moment and it will take care of most of the post processing edits that I can share with family later.

5 more...

Tabletop RPG. I started in High school, you need only paper a pen and a set of dice, right ? All the rules can be found online anyway, right ?

But it's so much better to have the physical books. And you need more than one dice of each obviously. And this nice metal dice looks very good. I obviously need different set of dice with colors pattern that match my different characters.

Speaking of characters, I need mini. I could get the cheap basic one of course, but the lead ones looks sooo much better.

And I obviously need custom models for all my characters.

Several years later, with a disposable income and I added maps, tokens, terrains, cards, ect. Even a tablet that I use only for this. I'm now limited by the storage place available in my flat (maybe for my own good).

May I suggest a 3D printer and set of speed paints?

There is something awesome about being able to print up and paint the exact monster before the session.

It's a whole new world of terrain and tiles you don't bother using half the time.

2 more...
3 more...

Watercolor.

Children play with $5 palettes. Apparently I pay $20 for a single color tube.

Mechanical pencils. You can go from $6 Kuru Toga Advances to $60 rOtring 800s to $100+ imported Japan region exclusive Kuru Toga Dives

Clicked that link as fast as I could. I thought it would be cool, but didn't realise it would be that cool. Thank you

1 more...
7 more...

Farming - family has been doing it for ~5 generations. I'd say we have put in about $10 M dollars over time (adjusted for inflation).

What's that dear? It's a way of life/occupation . . . are you sure? Seems like it must be a hobby given the return we've made on it over the years. Well, if you're sure.

My wife said that farming is technically an occupation and not a hobby. I still have my doubts given how much we have thrown away on it over the years, but I don't like to disagree with her (she's usually right).

This is something that's really hard for me. I'm against corn subsidies because I'm tired of everything having corn/corn syrup because it's so cheap. I think the subsidies should be based on something else that promotes variety, and also favors sustainable farming instead of monocropping with petroleum based fertilizer. I know it needs subsidized, because people are price sensitive, but it needs to be done differently.

1 more...

In Clarksons Farm Jeremy made about 200Ā£ before subsidies. So I can imagine how slim are these margins and how much you depend on subsidies.

1 more...

Playing music. Started on a shitty hand-me-down acoustic guitar. Got a better guitar. Got an electric. Got a better amp. Got a couple of pedals. Got a better amp. Got like 6 more amps, some cabs, 5 more guitars, a huge pedalboard, a cello, a keyboard, an audio interface, attenuators, mics, etc etc.

You gotta understand... I need all this stuff. There are subtle differences that you've never noticed before but will probably hear once I do an a/b comparison for you, and I absolutely must get an AC15 next to round out the collection instead of buckling down and recording something.

My brother took it to another level. He made his own guitar, then 5 string violin twice (because of school project) and some other instruments.

1 more...
2 more...

Making pizzas.

3 months, $200 of equipment and expensive ingredients and a day's work per pizza later and I can confirm it is 100% worth it.

What's your dough recipe?

It's this very bready one that takes like, three hours minimum to be ready. Like a half hour to mix and then two hours to rise and then another hour to rise in the pan. It smells yeasty as fuck but when it's cooked it is the best pizza anywhere.

I've never understood the minds of people who essentially like having their pizza toppings served on a cracker.

4 more...
4 more...
4 more...

Flight simming. Started out with a cheap joystick. Now I have an expensive one, throttle quadrants, rudder pedals, a vr headset and I've built myself a button box and a flight seat. And I'm now I want a helicopter collective. Oh well..

And you didnā€™t even get into the software.

Aircraft, scenery, support software like Navigraph, it all adds up. Fortunately aircraft and scenery are ā€œbuy it for lifeā€ and anyone who tries otherwise is liable to have rocks thrown at them.

VATSIM is free however, and thatā€™s part of why itā€™s so great.

Sim racing is very similar. Started off with a $150 wheel, then $300 with $300 ā€œrigā€ and $200 pedals.

Now I have something like a $8-10k rig with bass shakers, hue lights and the works.

I just dick around in dirt rally and ATS

2 more...
3 more...

I am probably too late to this... But here goes.

Every damn time I get into something, I over do it.

I spent $13k on my kitchen stove, this one keeps giving, but that is $13,000.00 USD! Just for my kitchen stove. My range hood because it is required with my high output stove was $3k, and then let's talk makeup air to replace what is taken out by it.

Or what about woodworking? Yep, I wanted to do it, and still do. I have a half completed work bench, and some basic tools... That will be about $2k...

Let's buy a boat! Yep 29 years old, runs great... Break out another thousand...

But most recently, Plex... You know, let's get rid of subscriptions... Yeah, this year alone I have put $900 or so into that. Yep I sure saved money on canceling Netflix!

To be fair, Plex/home theater stuff is so stinking fun tho.

That it is. What I really like is seeing 5 users or so all active at the same time... That makes it worth my $.

If it weren't for me being able to have friends use it, I am 99% certain my wife would kill me for spending so much on it.

I'm currently considering setting up Jellyfin to host movies for the times I lose internet. Something small, you know? No more than a terabyte... but that's a lie. I'm looking at NAS and I'm already realizing that this could turn into a problem.

1 more...
11 more...

Cycling.

You can certainly do it on an 300ā‚¬ bike, but who would want that if you can pay 300ā‚¬ for the helmet alone.

Same problem. I have now 5 bikes:

  • Old, but nice city road race bike (I needed a bike...)
  • Nice road race bike (racing bikes are nice, let's look at high-end ones, they are surely not that expensive...)
  • Mountain bike (wait I cannot go to this close-by trail with my road bikes...)
  • Touring bike (GF: let's cycle to this remote place ... )
  • Triathlon bike ( here I got too ambitious... )
  • NOW: I want a gravel bike, they are so nice, please send help ;)
3 more...
4 more...

Houseplants.

It started with a little green in the living room and suddenly turned into a full grown, humid, highly poisonous indoor jungle thatā€™s thirsty as fuck. And it turns out that exotic plants, fancy pots, growing lights, different types of soil for different species, fertilizers, and dozens of liters of water every day are somehow expensiveā€¦

Edit: yes, I love it

2 more...

Mechanical keyboards. Picked up a keychron for cheap. Decided it was too loud, decided to change the switches. Then the keycaps. Now I'm ordering barebones keyboards and artisan custom keycaps. This shit is an addiction.

4 more...

selfhosting/homelab. Originally started just using retired gaming PC parts to build a server. All it cost was the power to run the system. Years later and with more things/content I have, I just added a 5x 18tb hard drives and 3x 8tb. Just the 5 18tb drives was like $1500.

3 more...

Magic the Gathering..

Few years ago we found few old decks in our summer camp shared game box.

Someone looked at them said something like I think we could sell them for few hundred bucks and then put the rubber band on and tossed them back.

1 more...
5 more...

Sex toys. My collection is worth more than my car.

That's one hell of a depreciating asset ya got there.

Most of them are high end silicone toys from Bad Dragon and Mr Hankey's toys and hold their value quite well. I purchased around 80% of them on the used market and can turn around and sell them for about the same amount so the depreciation hit is minimal.

1 more...
8 more...

Solving the Rubik's cube

You either get into speedcubing and get high end cubes to improve your performance, at least of the official categories and a couple must haves like the Mirror cube.

And / Or

You start collecting cubes and puzzles of all kinds and shapes (yes, even non-cubical :o). You start to acquire custom cubes built by hand by artesians or niche brands.

For the love of what's good in this world, stick to that one budget MJC set of competitive cubes until you are actually 10 or 20 seconds behind the world record

6 more...

When I first got into VRChat to hang out with some friends, I thought maybe I could survive just playing on desktop for free. Now, a couple thousand dollars later, I own a Valve Index, extra base stations and 4 trackers for full-body tracking.

Music production. You start with pirated FL Studio and sone freeware plugins and the next thing you know is you're planing your hone studio with room treatment, expensive monitors, an expensive interface, aonther evrn more expensive interface, that one vintage compressor you absolutely need, a tape machine, and then you want I synthesizer, just a small, versaitle one, and next thing you know is you're buying the second euro rack for your mod synth because there wasn't enough space in the first one, because you need that one filter, and since you got lots of free slots now, why not buy some more fx. Fx can't hurt, right? And maybe one oscillator, you always wanted a fifth one...

1 more...

My grandma got me 3 ducklings in 2019 for no reason. 3 ducks don't cost very much. The issue is, that she unlocked a passion. I now have 12 ducks. I want more, but I don't have the money or space.

We just got few hens in spring. Week ago I found 2 chickens wondering on street.

Took them home and my parents said that every normal child brings home some kitten or dog not 2 chick's.

1 more...
10 more...

Arduino and hobby electronics. It started out as a continuous loop pad dye machine to save me having to dye fabric by hand, strictly mechanical, but then I wanted to automate adding the chemicals at the right times. Then it was keeping the dye liquor a consistent temperature. Then it was draining the trough automatically. Then I figured out I could design my own PCBs and have them fabricated. It just keeps going...

I'd like to know more about this. I'm trying to get into electronics and hardware automation but feel overwhelmed since I don't have any idea about electrical engineering

2 more...
2 more...

Woodworking. You start with a few tools to fix things in your house, and suddenly, you got vintage handtools worth thousands of euros and you seriously speak of installing your "shop".

9 more...

House plants. Sure a few mass-market plants are dirt cheap, but soon you get into unusual plants, plants with special needs, hundreds/thousands of plants, grow lights, grow racks, terrariums, automated watering systemsā€¦

Espresso.

It started with a second hand cheap machine from my grandmother as a gift for Christmas.

Then I bought a delonghi grinder for Ā£50 and a used delonghi dedica for Ā£60.

Then I upgraded the grinder to a baratza sette for Ā£300.

Then I upgraded the espresso machine to a Lelit Bianca for Ā£2000

Then I bought an EG-1 grinder for Ā£3000

Now I'm looking to upgrade my machine soon.

Also I bought acaia scales and a puqpress and various coffee related things along the way, as well as spending essentially Ā£10 a week on beans

4 more...

For me, it's board games. I figured a few good board games could last a while. I'm sure you are (incorrectly) guessing the next step, that I just bought too many.

No, I bought Kingdom Death: Monster. And now I want the expansion packs, which combine to nearly $3000.

Maybe you can help me. I don't understand "boardgame people." Like, enjoy boardgames and tabletop games, but not playing a brand new one every time we get together.

What's wrong with playing poker or Catan or NBA Jam for the thousandth time?

The same thing that is wrong with wanting to play something new: nothing lol

A lot of board game geeks hate Catan. I also hate Catan, but my reasons probably aren't their reasons. So there's that.

But I don't entirely disagree. It's complicated. I bought multiple games to find ones I'd love more. I find most people with board game obsession still have a favorite.

Like me, I've spent more time playing KD:M and Spirit Island than the next 5 combined.

4 more...
4 more...

I had the good fortune of meeting a couple of board game nerds before getting into the hobby myself. They had a seperate insurance policy specifically for their games.

1 more...
14 more...

Playing racing games on PC.

At first, it's just a few racing games with an Xbox controller.

Then it get more complicated with the more advanced racing sim/arcade and the controller isn't enough anymore.

Then come a simple wheel and pedals set.

But now the games is way more enjoyable, then up the difficulty.

Now I need gear shifter, hand brake, better monitor, better PC.

Then not long until I need a full racing cockpit to mount everything on.

And now, after all that is just the beginning.

4 more...

Traditional painting and illustration! While I now know that I never needed to spend more than $250 for professional-grade tools, I've spent about $18,000. As for sales in 3.5 years, they don't account for more than $800. For that I mostly blame Instagram where it's not possible to grow anymore organically and get an audience & potential customers. So I moved to the federated open source PixelFed now, if anyone's interested in my book-style illustration: https://pixelfed.social/EugeniaLoli

Also, as a word of advice for anyone who wants to also do illustration and don't want to do the same mistakes that I did. All you need is:

  • The Lukas 24 watercolor palette of student grade ($18). It's good enough and these days most paintings are scanned, so even if not all colors are lightfast, it's not a big deal. Few people only buy originals, most go for prints. If you're going to go selling originals, consider the Daniel Smith primaries set of 6 colors for $40.
  • A set of brushes of different sizes, including a flat brush and round brushes including a long thin one to do details, $15
  • Pencil, eraser, sharpener, $15
  • A set of gouache. Best bang for the buck for professional quality is DaVinci brand ($10 per large tube), or if you want to go cheap, the Himi Miya set for $25. If you go for the cheaper stuff, it's still advised to get a better quality white tube, so it's truly opaque (the cheap stuff aren't opaque enough). So go for Holbein or DaVinci white for $10-$15.
  • Soft core colored pencils, set of 48+. $15 (you will mostly need the muted colors to enhance the painting with harder edges)
  • Grey, sepia, black ink pens, and manga ink brush pens (for some types of paintings only), $40
  • 100% cotton paper for watercolor $25, or any watercolor paper for gouache $10 (gouache works on any, watercolor is more nuanced).
  • Brush watercolor markers, e.g. Tombows or Ecoline -- in case you want to do such type of illustration too, $30 for a few muted colors.
  • Masking fluid for watercolors, $10
  • White gel pen and white Posca pen (0.7mm) for white highlights, $15
  • Faber Castell white pencil soft pastel, $4
  • Caran d'ache Luminance white colored pencil, $4 (the cheaper colored pencils above again don't include a strong white)
  • Caran d'ache Neocolor II white crayon, $4
  • A ruler, to help you sketch.

I included various mediums above in white color because highlights are king in illustration, and each provides a different look and feel, depending on the painting. Happy painting!

3 more...

Surprised thereā€™s no reef tank people here. Imagine spending $5000 on a 20 gallon fish tank - BEFORE spending any money on corals.

Ya it CAN be done for $50, but nobody does that.

I had a small 160L tank, cost about 1000 dollars. Kept spending money buying more zoas and palys before I realized the filefish was eating them - he never did it while I was watching and started about 3 months after having him. Cute little gobshite though. Isolated him in a temporary tank, but then aiptasia started growing. Filefish back, zoas got munched. Left the hobby now but I fear I might do it all again.

Do it, you know you want to. >:)

Just a tank and some lights, add some flow and boom! Youā€™re there. Just get some salt and testing kits to keep things in balance. Those Hanna checkers are nice if you want to splurge - but thatā€™s it, youā€™re done! I meanā€¦. You have to get the fish and corals too - but you can make friends and get frags for free! Then youā€™re really done. Everything beyond that is automation, you donā€™t have to do any of it (although you can really dial in your nutrient balance if you use protein skimmer, algae scrubber, refugium, media reactors). But you donā€™t want to do that because then youā€™ll need a sump (but arenā€™t sumps handy? Who doesnā€™t want a sump?). Just make sure your stand accommodates everything-you donā€™t want to rebuild a stand. Leave room for controllers and uv meters and all that other stuff just in case you add it in the future - which youā€™re not going to becasue itā€™s expensive and overkillā€¦

2 more...
3 more...
3 more...

Getting fed up strimming our 4 acre, very steep field.

I looked at remote control mowers. At the time they were all well over Ā£6k, so I thought I'd try building one. Well, I've done it and it works well, but it's taken three years and cost over a grand so far in parts.

4 more...

Data hoarding and self-hosting every service under the sun.

I just spun up 3 Tdarr nodes on my proxmox cluster to tame my media collection.

Homelab (running home servers). Especially since I'm in Canada so I pay out the ass for shipping. Got into it purely out of interest for server administration, programming (computer science in general really) and the desire to experiment on my own hardware, but I'll have you know I have a total of 48 processing cores and 30 TB of storage running my personal fileserver and "private cloud!" Though not relying on the likes of Google for data storage and "cloud" services is a massive genuine benefit!

I also run BOINC and Folding@Home on the excess computing power in the winter, essentially "donating" it to science, which is perfect because my house only has electric baseboard heating anyway so I'm consuming the same amount of electricity for heating either way, and the electricity sources are mostly renewables where I live! The home office is toasty all winter, if kind of loud.

4 more...

Smoking cigars was a huge money suck, back when I used to smoke.

Other than that and video games, it's got to be art and writing supplies. Probably over $1000 if I add it all up over the years.

Which actually isn't that bad considering how much I enjoy writing and drawing, so I guess that's something to be happy about

Literally any hobby I have seriously messed with.

Although- racecars was never cheap.

My homelab started off pretty cheap. But, at this point, I am quite certain I have a few thousand bucks worth of hardware. Shit- I have two thousand bucks in just HDDs, SSDs/NVMes...

2 more...

Making electronic music. You can get lots of software tools for free, so I started out with those.

Then I realized how many details get lost, depending on what speaker/headphones you use, so bought myself higher quality headphones. As in, quite high-end for normies, but obviously, I'm at the lower end for music production hardware.

Now I'm considering buying a MIDI keyboard, because those software tools don't quite emulate proper piano playing. Although, you could obviously also spend money on getting different software tools. And of course, on a quadrillion plugins for these software tools, to produce different sounds.

I'm just glad that my other hobby is programming, so when my music-self gets excited about an idea, my programming-self will want to solve it.
...and then never finish what music-self wanted, but at least we're distracted from spending money.

8 more...

3d printing.

Started out with a cheap printer, mostly to supply my friends with miniatures and terrain. They loved the stuff I printed for them, so gave me money for my effort, which went into upgrading my printer and buying more supplies and buying a new printer so I could print better, bigger things for them.

Then, so enamored by what 3d printing could do, they bought their own 3d printers.

and now no one talks to me cause I no longer have any use and i'm stuck with a printer I havent even removed from the box and assembled for 3 years, and another printer that only stays around because every 2-3 months something comes up where I can design and print a part to fix something around the house.

I have been trying to get into 3D printing! It sounds so cool! Can't you connect your printers to the cloud so that other can print using your setup? Maybe you can charge for their usage based on your costs.

1 more...
2 more...

Iā€™m not sure it can get worse than bird watching. Completely free to start. Then you are like ā€œman I wish I could see that bird over thereā€ so you buy some binoculars. Then you think ā€œdang this bird is moving too fast I still canā€™t identify it, maybe I should try photographing itā€. Two months later youā€™ve spent 10k because bird photography is apparently the most intense kind of photography. Turns out photographing very tiny things that move very fast from very far away is very difficult and the lenses you need start at thousands of dollars and go up to tens of thousands of dollars. That isnā€™t including the camera body, which you probably want very fast autofocus on, along with bird eye tracking, which hardly comes on any cameras at all.

Yeahā€¦

2 more...

Reloading.

I thought, I can buy a Hornady press, use range brass, and same some cash!

And, well, kind of. But mostly no. Yes, buying primers, bullets, and powder, and using range brass is indeed cheaper than buying boxes or cases of ammunition on a per bullet basis. Sure, a set of dies can get expensive ($200+ for match-grade dies if you do, e.g. long range shooting competitions). Oh, and you need to clean your brass, preferably in a wet tumbler, and then dry your brass, and also get a trim station to trim to length, and possibly a primer pocket swager if you've picked up military brass with crimped primer pockets... And a scale, you gotta have a good scale so that you know exactly how much powder you're using (seriously; you need a good scale, you cannot skip this), and you need a chronography to measure speeds to develop the most accurate loads...

...And then you start getting into progressive reloading presses that are intended for really high volume shooting that start at around $2000, and top out at around $10k, plus things like annealing stations so that your neck tension is always consistent after you've crimped the case, and powder tricklers for when volumetric powder dispensers aren't accurate enough...

But the real expense hits when you're shooting 10x as much because now ammunition is "cheap".

BRB, gonna spend $400 on 8# of Varget powder and $300 on 1000 Hornady ELD-M .224 bullets.

1 more...

3D modelling. It's impossible to get into 3D modelling and not get eventually sucked into 3D Printing... Which as other people have explained on the thread, is it's own money sinker.

3 more...

Tinkering with electronics. Like, breadboards, integrated circuits, transistors, microcontrollers.

I've got a tacklebox full to bursting with components and parts worth probably close to a grand.

1 more...

Music production. Started with a old pc and a pirated version of ableton. Now I bought my first top tier laptop and a license of abletonā€¦ and oh whats that around the corner? Is that a modular synth?

4 more...

D&D. When I got back into it as an adult it was mostly because I could get into it for $0. I was dead broke at the time. I pirated the books downloaded the free basic rules šŸ˜‰ on my trash find laptop and was good to go.

But man once I had money it turns out I really like collecting books and the D&D ones are not cheap. I do not want to think about how much I've spent.

The real flood gates opened when the license controversy happened and I decided to try other RPGs. Multiple core books of multiple RPGs gets expensive fast šŸ˜

1 more...
4 more...

Pc gaming. I started off with a refurbished HP omen, but now I'm wanting something more. I'm aiming for a custom built and that has led me to the discovery of companies like Digital Storm, System 76, and Falcon Northwest.

Torrenting and data hoarding are also hobbies of mine. Every so often I'll buy an external hard drive once I max out the storage on a current one. One hard drive failed a while back and now I'm looking for data recovery companies, but their services are a bit pricey.

Ugh, tell me about it. I just replaced my server. New machine has 128tb at half capacity. My family is starving

My humble used office desktop turned NAS quickly became a dual-processor, 64GB ECC machine with more storage and processing power than I'll probably ever need.

Vinyl records... 25 years ago you could hardly buy them . I listen to punk and they never gave up on the format and so it was cheap and collectible because print runs were small.. from 2010 onwards, they came back in fashion and the major labels started clogging up the pressing plants and then pre-orders became a thing and the price started creeping up...now, in my country a vinyl that used to be $20 is now pushing $55 and mainstream artists are pushing $70 ...my desire has really waned.. I'm priced out of finding new artists because I can't buy everything all the time like I used to.

7 more...

Probably gardening.

A few seed packets and some dirt turns into building nice cedar raised gardens, filling them all with great quality soil, expensive liquid fertilizers, various irrigation systems, and so on. And I can't just haul all that dirt in my sedan... But hey, I have 20+ tomato plants, and about as many different pepper plants every year.

It's honestly nowheer near as expensive as some of my other hobbies, but on the "a lot more money than I expected" scale it's up there.

Knitting. Only handdyed yarns, which are costly. And of course you need ALL colours. And only the most luscious fibres and yarns.

I've resorted to dyeing yarn myself - which opened up another deep, deep rabbit hole.

And a business.

3 more...

I think audio, headphones, amps, all this stuff. Microphones, recorders, physical mixing gear. If I would go in that direction, I would need a seperate room and loots of money

I just wanted a nice set of headphones to listen to stuff.

Then I learned my lack of a DAC was bottlenecking the setup.

Then I learned me not having gold plated braided and custom made cables was bottlenecking the setup.

Then I learned I can't hear a damn difference lmao

1 more...
1 more...

Amongst all my hobbies (am kind of a serial hobbyistā€¦) I think fishing is the one that turns out the most expensive compared to my initial assumption.

Started with trout fishing into fly fishing the lure then carpā€¦ daaamn now Iā€™m looking into a bassboat or a kayakā€¦

Wait until you get a fishing buddy, and you start gifting him tackle. Then a few days later you realize that hey you miss that rod you had, so you decide to buy another, but now they're like an extra $100 then they used to be. So you pick up ot at work but now your whole week is thrown off, and you can't find the motivation to go down to bass pro, buy a rod, reel, and line and tackle because you've worked 70 hours this week, and you figure it'll be best to wait until next week to do it.

Next week rolls around but car registration is due and you decide to use your hobby budget instead break into your savings. Now you're back where you started. To make matters worse the guy you gifted the rod to isn't into fishing anymore.

Started out with a raspberry pi several years ago. Got my feet wet with entry level, beginner friendly NAS prebuilds. Hunted for recycled computer parts. Now searching for and actively acquiring enterprise gear that is making a massive dent in my wallet.

4 more...

Film photography. Started with a camera I got for free, and $20 worth of film. Quickly spiraled into many cameras that I bought or inherited, and so much money on film and development

I started music when I was like 7/8, my parents encouraged me to do so. And here we are, 20 years later, my dad told me cocaine wouldā€™ve probably been way cheaper.

Itā€™s a toss up between cooking and home networking for me.

Cooking because it started off as just finding neat recipes and giving them a shot to now experimenting with new techniques and harder to procure ingredients. My pantry looks like a mini spice market and keeping them fresh is its own hassle. Plus needing all the gear gets expensive!

I also got really into home networking during the start of the pandemic. I went from having a simple off the shelf mesh network to a full network rack in my basement serving some high end access points and cat6 drops in every room. Now I have a pretty secure iot stack thatā€™s separate from my main vlan and one devoted to my work computer.

Wait until you try homebrewing or something similar. It is another rabbit hole worth pursuing.

3 more...

Have you tried playing table tennis? It starts tame, but as soon as you get a bit competitive and learn about custom rackets...

I just drained my bank account last weekend for a new racket and box, a few new balls,...

Running. Not as expensive as a lot of the things posted about here, but my shoes cost ~$150 and I have replaced them a couple times a year. I'm planning to get in to trail running soon (as opposed to running circles in my neighborhood, so now I want to add a running vest and a GPS watch, which is not cheap.

Considering that in theory all you need to run is your body and an open space, I feel like I have spent a lot of money.

EDIT: I forgot the ~$140 bone conducting headphones I bought! I for sure feel safer with them than my old headphones though, since I have been doing almost all of my running till now on the road.

It costs a chunk to run, but saves a lot in health bills - even in countries where healthcare is universal. Heart disease is both a killer and something that can incapacitate you, and any potential weight loss benefits aside, running is fantastic for heart health (provided you do it properly and with the approval of your medical professionals). Not to mention it also has focus, mental health, and sleep quality benefits. Plus if you really get into it, you'll soon be training for some disturbingly long race and be too busy to do much of anything - especially shopping for pointless things you don't need.

I'd say that most people can get started with decent wicking workout clothes (thrift them if you can and go for gaudy neons if you live in a place that's dark most of the year), and a pair of decent running shoes on sale. Wireless headphones and a running belt (or just going for pants with zippered pockets to hold your phone) are small upgrades that also make it better if you have a bit of extra budget. Run like this for like a year, and then slowly upgrade with gadgets like running watches, CamelBak backpacks if you start doing long distances and feel like you need it. Also consider investing in slightly better clothing based on what you determine your needs are - colder climate thermals, merino, running shoes for specific pronation, and rolling tools to help you stretch.

Running can be as cheap as less than ~$100 a year or as expensive as you want it to be. It's cheaper than the gym, CrossFit, at home workout equipment, yoga classes, etc. Not to shit on those things at all, in fact cross training helps you build strength and avoid injury. But nobody should ever feel discouraged by running due to costs, it pays off in spades.

And for new runners, run s l o w. Slower than you want. So slow you feel you're not doing much and practically walking. Slow and long runs are the ones that make a real difference in building stamina, cardio health, and even decreasing your race times. You're also less likely to get injured and prematurely get winded by using up all your energy in a sprint. Also, walking is fine. Even experienced runners walk during certain moments - usually for me, I'm doing it to get a burp out or something.

2 more...
6 more...

Arma 3. I updated my router, computer and bought the dlcs so I could run a server.

1 more...

I had a recipe blog prior to the pandemic. I put well over five grand into it over four years and didn't make a cent.
If I hadn't decided that I hate website with ads and third party cookies on them I probably could have made a few bucks during the pandemic.

5 more...

I've had amazing luck with hobbys that should be expensive, but weren't.

Me & some friends have a small computer museum. We collect minicomputers & workstations. (Stuff used in science & academia.) We have computers dating back to the early 60s. But we started in the mid 90s, when NO ONE was interested. So we got everything for free. (Well... for the cost of renting large trucks.)

I'm a photographer. My DSLR is old, from just when DSLR's were getting "good enough" at a reasonable price. I bought it used when it was already "obsolete". And then someone gave me an exotic industrial camera they had at work which was "broken". It was too broken for industrial use, but works fine for studio use. I had to build some hardware & write all the software to use it, but... the results are fantastic. It blows away my DSLR. (But uses the same lenses!)

My library has probably cost a lot, but that's spread out over 40 years, so I don't notice it. (Also, I worked in a used bookstore for a bit, and that's a good way to get a lot of books CHEEEEEEEAP. Employee discount? Yes. Discount on books in the back that are slightly damaged and unsellable? YES.) And I've occasionally sold a rare book, so that offsets things.

Etc.

(Note: my home computer collection spans ten full-height racks. A few of those are on loan from the museum, but most are mine. Spent close to nothing on that. Somehow.)

2 more...

Flight-simming. I started with a cheap joystick. Now my desk is littered with touch-screens, custom controllers etc.

2 more...

Gaming. It used to be an MMO for like $15 a month. Now it's a new game for $70, the game has DLC for $20-$30 or skins or some battle pass.

2 more...

Probs low hanging fruit for this thread, but vinyl collecting.

Started around 2011 by going to charity shops and second hand stores to find bargains. I used to be able to spend Ā£10 a week and get 3/4 new (to me) records. Some were great ,some were trash, but that was the fun!

Then I started getting specific records, building towards band discographies... next thing I know, I'm dropping Ā£25 per record for two bootleg records that were definitely not worth the price. Was a watershed moment and one that made me take a step back.

Ticked over for a year or two, next thing I know vinyl records are now in Asda, Tesco and Sainsbury's. Every new release comes on vinyl, and they're now Ā£25+. Charity shops are now just full of junk vinyl, and all the second hand stores now charge Ā£25+ because their pressings are "original"... all the fun is now gone.

Oh boy, where do I even start. I guess we should first have a minute of silence for my wallet...

  • Fixing old computers

    In high school, I agreed to take the decommisioned PCs home. They were in various states of not working, I diagnosed the problems, bought parts, upgraded and fixed them all. I now had a ton of relatively old but reliable computers. What's the logical next step?

  • Home server room (homelab).

    I live in a flat with a giant basement, so it's full of these old PCs and servers. I needed a server rack, switches, cabling, the whole nine yards.

  • Photography

    New lenses and filters constantly bought. Sometimes a new camera body. This is my most expensive hobby by far, but I take care of the lenses so they at least hold value, unlike the PCs :)

4 more...

No other ham radio nerds here besides me? It always starts with a $35 Baofeng hand-held...

I'm in the beginnings...and yes, with two Baofeng handhelds lol. Then I got a little SDR kit for receiving. Of course I also needed some cable adapters and ferrite cores, while I was at it. Oh, and the ARRL license manual to study for my technician license (I knew nothing about amateur radio prior to this rabbit hole, so it was actually really interesting to read)

Was supposed to have my technician license already, but life got a little chaotic. Was passing all the practice exams easy and just needed to sign up for the real exam. Hoping to get it done soon, but I have to brush back up a little. Then I'm hoping to move quickly to my general class, while the basics are still fresh.

Even started learning morse code and was getting better at it. Had the alphabet and numbers, could read it just fine, but the listening is what's hard... but still kinda fun. All the Q-codes and slang are what I think will take the longest if I really start getting into CW, but I know that'll be time/experience more than anything

But for now, I just listen-in on my SDR around my area when I can, and have maybe looked into how to grab some NOAA satellite images lol

So yeah, I can see this becoming a bit of a thing for me, because I keep learning more and more, and it all just seems so cool to me. Using the ionosphere to propagate, tropospheric ducting, or even using freaking meteor scatter! So much cooler than I ever thought when I knew nothing

4 more...

Amateur Radio, Data Hoarding, Pc Gaming, and my car.

"Hey, with all the advances in chip technology, I bet radios are cheap now!

...

"Oh."

Homebrewing. I have made many a beer over 8 or 9 years. They get better with each batch, but along with it is another new piece of equipment to make the process easier or more efficient.

Check out the homebrewing community at sopuli.xyz (or at my other post there).

I didn't count homebrewing as that expensive because my dad taught me to brew and we share equipment.

Edit: didn't check your profile but you already posted there

1 more...

Getting back into PC gaming after buying my friends old 300 euro gaming PC. I'm looking to upgrade and every little bit faster is only a little bit extra, so a 100 euro upgrade turned to a 120 euro upgrade, then a 150 euro upgrade to... i don't want to say how much i spent...

2 more...

Audio equipment. Started as someone who collected a bunch of budget king IEMs and have been slowly creeping my way up in cost ;-;

2 more...

Any art medium that requires canvases. A small one at WalMart is no problem, but as you move to larger works and need better canvas material it gets expensive fast.

Oh! And Arduino programming. A simple kit to get going isn't too bad. Then you're trolling Adafruit for parts, then you go big and start importing from China directly. Now you're building a garage addition for the electronics lab... Or is that just me? At least it's also able house my first motorcycle... First...

I make a cross between dioramas and video games. It started out as a test to see if I could make something and now I am all in. It's all I want to work on. I have spent so much money on old lcd screens

3 more...

Dog training/sports.

Here I am thinking "I need to get more active and it'll be fun to do stuff with my best bud Link" (Link is a 4 year old golden retriever)

Starts with basic training obedience classes, no biggy. Then they offer Rally classes, which is basically obedience plus some fun stuff, cool, I'll take that class. Oh, I can get a cool title for him? Sure, we already trained him, why not! Ok he needs 3 successful runs, and each run attempt is $25...? k...

Rally Novice acquired...fun but... Was that really worth 150 for the class + $75 for the three runs? ...sure whatever

Ooooo agility sounds fun! Let's do that! $150 for a 6 week session, that's not bad! 6 months and many sessions later + buying practice equipment... I'm officially poor. My dog is a happy boy, and I'm more active, but FML this is a rabbit hole lol

We're having a lot of fun, and my dog is a happier more obedient boy, but man was I not expecting the crazy expense. Those people with the dogs that have a bazillion titles and letters after their names? They've spent a literal fortune on that dog. It's absolutely mind boggling.

1 more...

Music production. And IT in general.

But specifically the music production; started off as "I'll by FL Studio and muck around with it" to "I need ALL THE VSTs!". I've sunk like $2500 into it in the last two months (which is a hell of a lot of money to me), and I keep buying shit for it.

Am I any good at it? Fuck no. But it's not stopping me from keeping at it and buying shit I probably don't need :P

And the IT stuff consists of rack-mount servers and Pi's. I've sunk around $25k into it all over the last 12 years.

6 more...

Homebrewing. If you want to brew something like IPA the cost of hops gets way higher.

2 more...

Tabletop Roleplaying Games.
I bought Mutant Year Zero in 2015 thinking "Ah, this will give me countless hours of play! I can make my own adventures and stuff!"
Now, my shelf is buckling after trying a hundred different games and supplements, and getting addicted to pretty books.
Currently, my favorite game of all time is Delta Green. Investigative horror mystery. Amazingly horrific scenarios (adventures) with True Detective season one level of masterful writing.

Check out Glass Cannon Podcast playing it on Spotify if you want!

2 more...

I started getting invested in a TCG (Digimon) for the first time ever a couple months ago (magic, YGO, pokemon etc. never did it for me before).

One of the selling points (at least currently) is that most decks are fairly affordable (less than 50 bucks affordable) and viable and even the very competitive decks shouldn't set you back much (with less than 100 bucks you can easily make a top tier tournament-viable deck) .

Problem is I really started digging lots of different decks and discovering new favorite digimon and how they play and now I'm several hundreds of dollars of investment in both in cards and accessories (not even counting merch...).

I regret nothing though. It has helped me get out of the house (I work remote) and interact with people which has been very good for my mental health, and it gave me a way to revive some of my childhood nostalgia.

2 more...

My wife and I started playing Disc Golf as an "inexpensive" and more accessible option to traditional golf with a started set of cheap discs off Amazon. Carts bags, and DOZENS of discs later...$$$

Art.

Gave up on buying and maintaining copics and just bought CSP. May have to switch to Krita at some point, but digital art is far more accessible than other mediums. Want a marker texture? The brushes for that are free, only real barrier is a graphics tabler.

I wanted to say to just buy Procreate for the iPad for $10

Then I remembered ipads are starting at $500 and that's without the pen. You'd have to pay another $100 for it

2 more...
2 more...

Cycling. I started with a bike that was given to me by my uncle. Now I have a road bike, full equipment x3, a direct drive trainer for the rainy days and a subscription to use that.

3 more...

Magnet fishing.

I bought a kit that included a reasonably sized 360Ā° magnet, rope, grappling hook and protective cover for about Ā£120 thinking that it would be good enough to keep me satisfied for a while.

After my first trip out and having to carry a load of scrap metal about a mile back to the car, I bought a cart for Ā£80 so I could cart it all back instead. After having to use my car to pull my magnet out of the harbour on Saturday I've bought a cheap winch and a tow rope to anchor it to things for Ā£25 for when it gets stuck somewhere I can't use my car.

And of course I wanted a bigger magnet almost immediately, but I've managed to hold off on that so far. Saying that it's fairly likely I will get an upgrade from Bondi magnets when the site launches as long as the price is competitive with Magnetar (I suspect it's a partnership and the magnets will be identical, but we'll see)

3 more...

I bought a vinyl copy of Beggars' Banquet by the Rolling Stones for 50p despite not having a record player. Fast forward six years and I now have a full stereo system, a collection worth over Ā£10k and regularly order limited edition albums from small bands costing me large amounts each time. Send help.

1 more...
  1. Videogames. It has not been super expensive as I enjoy indie games the most, but still.

  2. Pen and paper organization. This is recent. Due to a couple of mental disorders, I have problems remembering things and keeping organized. I was using a to-do list for my phone, but it was becoming less and less effective with time.

So I found a weekly planner online and I bought it telling myself that it was expensive, but it would be enough for a year and I wouldn't need anything else.

The planner has been great, by the way. Yet, when it arrived, I liked it so much that I had this classic feeling of not wanting to ruin it with my handwriting. I needed a good mechanical pencil! Erasable, yet stylized.

Then I thought the pages looked clean, but monotone. Stickers! What about my own creations? Thermal printer with sticker rolls! And so on and so on.

I am productive ...and addicted to stationery items.

4 more...

Only because no one has said it yet, headphones. You can get a really great set of headphones for $200 or so, but if you want it to sound a little better you're looking at $500-$700. But music can sound a bit better if you get better equipment for around $1200. Then you hear a $2000 set-up, and you chase that, until you hear a $5000 kit. And it just keeps going.

Coffee.

I started with cheap pre group coffee from the supermarket for less than Ā£3 a bag and a chemex I picked up for Ā£20. I now have four grinders, a bunch of pour over gear and an espresso machine (marax), worth several thousand. Plus a Ā£80 a month fresh coffee bean habit.

Hiking.

This.

You get some gear. It's nice, but heavy...then you realize there's so much lighter stuff out there.

$100/lbs later your congratulating yourself that your base weight is 15lbs until you add food and water, and you realize that your pack still is too heavy. You finally shave off another 2 lbs by buying all new luxury items at $30-$50 a pop, and getting a lighter stove.

Then winter comes, and that 4 season, dyneema tent looks mighty appealing. Not to mention you need a better rated sleeping bag (cause that hammock ain't gonna cut it) and a pad, a better puffy and fleece, crampons, maybe an ice pick, and another stove that works in the cold...

Edit. Damn it, I forgot I need new shoes...even if I wanted to brave it using my summer pair, those trail running shoes are destroyed over the course of 1 season.

4 more...
5 more...

I thought I would learn to design electronics. Turns out the tools for that are expensive. Also enclosures to make anything look good often cost more than the electronics. Then you've got to get the boards made at a factory if you want them looking slick, so you've got to make 5 or 10 of every project at the very least -- or your wasting perfectly good circuit boards.

I found a neat hack to fund my hobby though. Turns out you can just call a lawyer and after some paperwork, you're the owner of an engineering company! For less than the cost of a high-end oscilloscope! What a wild world we live in.

4 more...

I like to repair and restore broken vintage audio gear.

"Wow, this 60's Sansui amp and those 70's AR speakers are practically free! I already have all the tools I need to repair them, it'll be fun and cheap. When I get these restored, I won't need anything else ever again!"

How little did I know.

Was violist (played the viola) for years. It's similar to a violin just a bit bigger and deeper. Have a true love for it... But it's expensive to maintain after a while because it's good to keep up private lessons, the maintenance of the instrument, and then having to buy sheet music/music books for only playing one song, one passage.. I miss it.. not the most expensive hobby, but got that way for me cause I am a mom of four and married.. SOOOO yeah

5 more...

I started knitting for my kids when we were living in colorado.

so I ended up processing wool from raw fleece -> hat

raw merino fleece, raw alpaca fleece, Scouring soap, dye, dyeing classes with natalie redding, spinning wheel, drum carder, hackle, table loom, warping thing for yarn

Math

ended up going to school for math education (with pell grant $500 per 6 month term) I can't pass the exit exam. tried 5 times out of those I had to pay out of pocket for 4 of them $480.

and surprise, I got dxed with ADHD. That's why I couldn't pass the tests. now I pay $50 a month for it (doc + meds)

2 more...

Used to homebrew. At first I thought it'd be cheaper than buying my own beer but it quickly ratcheted-up with grain mills, larger and larger pots and burners, finding places to store the fermenting/aging beer, finding time to brew, finding time to bottle/keg, the clean-up and mess...and, in certain cases, you go through the whole process to find an entire batch has been ruined.

As an alternative view, I homebrew and while the cost to get in can be a bit steep, the long term costs are actually pretty good. I looked at the cost to get equipment as a loss and just wrote it off. Electronic kettle and automation was pricey, but luckily I was able to have some costs offset with work benefits. Realistically though, in actual ingredients, between $30-50 USD for 5 gallons of beer and about 8 hours total of time for cleaning, brewing, fermenting and packaging, it's not too bad.

I tend to be very meticulous though with my brew process, so I haven't lost a batch, at least not due to contamination. I've had some beers that weren't great, but when you put it in perspective, a 12 ounce serving probably cost me about $0.50 - 1.00. Comparatively, while not great, it was still drinkable and as good as anything I could get for that price.

Being able to make decent sized quantities of good beer to take to parties, give as gifts, and just have on hand really diminishes the hit of the cost of equipment. I feel like it's been worth it.

2 more...
3 more...

Food...I like cuisine. Requires eating out. I find a place, don't care about the cost. Try something I've never had. It can get expensive.

3 more...

RC stuff, but only kinda? My dad got me into micro helicopters about a decade ago. I now have several dozen planes, drones, helis, etc. Not to mention multiple RC radios, batteries, chargers, and FPV goggles. Absolutely love it, though. To be fair, it's been a few thousand dollars over a decade. It ads up sure... but quite a bit less than I spend on video games, and more satisfying. :)

7 more...

I got into theater lighting in high school & college. Years after graduating and getting a ā€œrealā€ job I discovered a bunch of all volunteer community theaters in the towns around me. I started doing lighting design, and over time amassed a bunch of my own gear. Iā€™ve also gotten a bit of a name for figuring out special effects. In my basement I have a dozen professional LED stage lights, strobe lights, a fog machine & hazer, and a bunch of bins of odds & ends used for various effects.

1 more...

Simple, I read. And with the internet I never have to worry about buying books.

6 more...

None of my hobbies are inexpensive (bikes, guitars and parenting)

Every time a friend tries to get me to take up snowboarding or some other gear based hobby I'm like, "are you fucking insane?"

6 more...

Not sure if youā€™d call it a hobby or more of a collection but I collect mechanical wrist watches and that can get expensive fast.

I started with a mechanical under $100, with a decent movement and a display back case so I could see the gears and rotor inside, and that couldā€™ve been it. But once you get the bug, you want to get different types of movements, different case sizes, maybe some complications, sooner or later youā€™re going to start wanting some hand finishing, and then it gets really expensive. I wanna get into mechanical watch repair too but that gets really expensive and takes a lot of skill and time so Iā€™m going to hold off a few years I think. Plus once I go there, thereā€™s no coming back. Iā€™ll be buying broken stuff on eBay constantly and there goes all my paycheques

6 more...

Cross stitching.

I must have $700 worth of floss a 200$ custom stand and then accessories, I just gave away 82 skeins of off brand that advertised dmc dye standards, but WEREN'T. Don't buy floss from Amazon kids, it's worth it to do a custom order from joanns or Michael's mid project.

It started with wanting to do a fun little Christmas ornament project with the Littles and now I have 7 mid finished projects including a massive LOTR project I've restated 3 times, that has 1 of 12 8Ɨ11 pages done on this beast l nearly 3'x2' Aida cloth.

Disc golf.

Discs cost only $15-20 new, used ones can be only a few bucks, you only need one or a few to play, and most courses are free.

In reality, you keep buying new discs. And a bag to carry them. And more discs. And a bigger bag. Then a home basket. And a net to practice in. And more discs. Then a rack to hold the extra discs you canā€™t bagā€¦. It adds up!

Hobby electronics started cheep, with a crappy soldering iron (a good precision one was the best purchase ever) and some cheep parts, ended up with a room stuffed with a thousand dollars worth or parts and a few thousand more in test equipment.

ITT: Everybody's current/longest hobby.

Mine is boardgames. You start free by playing somebody else's collection, then you get the urge to start your own...

Firearms.

It was fairly inexpensive before the pandemic. But since it's been a nightmare of price gouging.

It's also one of those hobbies where buying one thing leads down a rabbit hole of spending.

Hiking. You start out with what you got. Then on the first few hikes you find out what gear you absolute have to bring with you. Then when you have a fine little gear stash, you begin adding things from the never ending ā€œnice to haveā€ list. Then you go to outdoor stores just to have a look aroundā€¦ HA!

1 more...

Sim racing and Photography

Started with a $200 wheel and pedals setup, now my rig is worth weā€™ll over $2.5k and is basically top of the line. Upgraded parts one at a time over the last few years and itā€™s now as good as it gets.

Photography has me slowly upgrading lenses and eventually a new camera body. Just upgraded to a 200-500 F5.6 lens the other week for when Iā€™m going to shoot the Daytona 24 this coming January.

but, nobody gets into simracing and photography thinking they are cheap hobbies, do they? I mean, sure you can get a start with a low budget but everybody knows the really nice toys are $$$

1 more...
4 more...

Camping and camping gear. It can be so cheap and easy, but when you start buying high end gear it adds up quick.

Not to mention the different types of camping, backpacking, car camping, glamping, etc. Car camping ā€œoverlandingā€ gear is awesome, but so expensive.

1 more...

Rc cars. I got a crappy 1/6 scale truck (newbright) for shits and giggles to see what it could all do before I fried and broke it. Ended up slowly dumping a bunch of crap into it (Batteries, lights, new controller, esc, new brushless motor etc)

Wouldn't have been quite so bad if it was a "normal" scale rc, but parts for something 1/6 scale is pretty pricey. I could have just bought a better machine, but it was still fun and I learned a bit about rc stuff. This is the frankenRC https://i.imgur.com/ey1jJYX.jpg

Electronics repair and projects

All I need is a soldering iron.... well of course it needs to be digital! I also need a DMM for troubleshooting, as well an ociliscope. Guess I should also pick up a bench power supply so I don't need to run everything through two leads of the DMM to find the amps. A couple years later Well this is a surface mount issue, I need a reflow heat gun.

3 more...
3 more...

When I first got into my hobby (DJ) I thought I only needed to pay into the set up cost of buying equipment (turntables, mixer, sound), but I eventually learned that I had to keep buying records because I couldn't just mix the same two recorded forever, and that got expensive.

Coffee for sure, never saw myself owning a $300 coffee grinder a few years ago....

Smart phones and headphones aren't exactly cheap but, I have built a bit of an expensive hobby around collecting them lol

Knitting/crocheting and cannabis. Not (always) together. Yarn art to pass the time while sitting with my mom - I start a lot of things and always need new yarn, but I never finish anything. Cannabis because I started making candies for a sick friend and it's pretty easy to get caught up in different strains and what's on sale this week.

For me it was Badminton. You can start off with cheap $15 rackets and plastic shuttlecocks. Now my racket is $260 and I play with feather shuttlecocks which are about $2 a piece and only last a few rallies.

Instant (analog) photography and collecting pins and buttons. Turns out film is expensive and buying pins are expensive. Started out with friends giving me pins to stick on my bag and now I have close to hundred pins on my pin wall. At least they look pretty rad.

Fountainpens. Started with some cheap Chinese pens. Now I have multiple vintage pens and a Montblanc that I love writing with.

4 more...

Collecting vinyl records. I started 10 years ago when you could get lots of records for 3-5$ per record. Now everyone is crazy about collecting and they can cost 40-50$. Was a great investment if I sell them. But I enjoyed collecting them regardless of value.

3 more...

Believe it or not, self-hosting! I went from renting a VPS for $40 a month, to purchasing an entire $150 machine at home, plus $50 or so in additional storage, plus a $20 a month VPS solely to bypass NAT restrictions... plus a few hundred dollars more when I first started, because I cheaped out on components and managed to brick not one, but two Intel BIOSes trying to update them.

4 more...

Playstation 4. Huge money went into buying discs and digital games.

Buy used.

The disk-less "cheaper" PS5 is 100% the more expensive option.

Also, if you buy a new game you'll have the option to sell it on, recovering some of your initial investment.

1 more...
2 more...

Guitar. Pedals, amps, cables, picks, more picks, straps, strings, mics, stands, clamps, etc all add up. Oh, and of course you're always enticed to upgrade, but you can't get rid of the one you've grown to love, so now you have n+1 guitars.

To be clear, you can do amazing things with a Fender Bullet, but it's a slippery slope for sure.

3 more...

3D printing. Purchased a cheap 3D printer to save money printing things instead of buying things. 5 printer print farm later, no idea why I'm doing this to myself.

I started gaming back in 90's and here it was just buy a game and you got i all. Then I got to pc gaming and watercooling, in the 00-10, And then something happend in these Decades becous what I used to pay fore a full pc with high end components and watercooling is the damn price fore the RAM.

For me it's photography. I originally bought a camera and lens second hand. Now over the past two years its become rather a lot of money. I bought a Nikon Z8 last month and it was definitely worth the money.

Cigars.

It was only supposed to be a few of the affordable ones with basic accessories.

Hunting. When I was younger, poorer man I used a hand me down lever action rifle and a $5 orange vest to fill my freezer with cheap venison that I would butcher myself. for less than $100 in licenses, ammo and packaging material I could put 3 or 4 deer in the freezer in 1 weekend.

Now, I have multiple gun safes full of various guns, all of them to serve "different purposes" like long range, brush gun, restricted weapons hunting areas, slug gun restricted areas, hunting shotguns, competition shot guns. Then there's the hunting gear, knifes, packs, laser range finders, reloading equipment, hunting lease payments, guide fees, out of state application fees.

Last year I shot 1 deer and paid $140 to have someone else butcher it for me.

2 more...

Game collecting

What started out as picking up C64, Atari, and Nintendo games in the 80s and 90s has turned into a collection of thousands of games totalling tens of thousands of dollars...

EDC (everyday carry) this can include pen, notebook, knife, phone, fidget, etc. my most expensive piece that is in my current rotation is my fidget clicker in full brass from unquiet hands. that one chunk of metal and magnets cost me $130

4 more...